3 custom airguns, hatsan at44, crosman 2240 and 2250

Got 2 nice ones I put together. 2240 sold

***price drops***

They all work like they should.

***The hatsan at44 in .177 has an aftermarket Lothar Walther barrel on it, topped with a custom tunable brake (made by myself). Reworked the valve for better efficiency,  it is shooting jsb beast Diablo 16.2gr pellets at 880fps. That's at minimum power. Lots on tap if you want to shoot slugs. I was shooting grasshoppers with this rifle at 50 yards. Comes with 4 magazines, degasser tool, and a couple tins of the heavy pellets. I'll include the original iron sights as well. Can't use the brake with them though. Asking $700... $650 pal verification required for this one.

***Crosman 2240 custom .25 cal. I cut up a 25 cal springer barrel and made it fit this lowly 2240. Bluefork design trigger housing/ar grip adapter.  Has a 3d printed grip. It's quite nice, I don't know who made it. Shoots 26gr pellets around 440 fps. Should be no problem staying under 495 with lighter pellets. It's running on co2 cartridges,  did some valve work to get it up there. Custom stock made by someone,  it's a little minimal... does the job.

Oh the receiver was spaced up using some washers,  custom fitted. Didn't want to put in the effort to somehow machine a nicer solution. This works fine. Probe Oring in the barrel breech. 

I'll include a tin of pellets with it.

Update,  I 3d printed a barrel band for it. Tight friction fit, adds a little support. 

Buy it you'll love it. Who doesn't love 25 cal pellets guns? No pal needed!

Asking $old

***The crosman 2250. Has a safe pac pcp adapter.  Pump it up to 2500 psi ( high as I went). Apparently it's safe to 3000 psi. Do your research...  it'll shoot .22 pellets up past 800 fps, though as tested it had a steep velocity curve. Starting low and peaking high then falling again. It's a good one for tinkerers.  Change the hammer spring, play with the spring adjuster, get it doing what you like. 

The gun has all nice parts, stainless screws and bolt assembly. Fancy brake. I didn't make the brake. I don't think I did anything too crazy to the valve on this one. 

Asking $300... $275... $250... The 2250 is classified as a pal rated carbine in canada.  Not a pistol. So, pal verification is required for this one.

Any questions feel free to ask.