LH Desert tech SRS A1 7 SAW and 300 norma

Hello all! Going to post this again as I haven't been shooting nearly enough to keep everything. I have an excellent condition desert tech srs a1 left hand chambered in 7mm saw and 300 norma. Both barrels done by insite arms and shoot awesome! Package is as follows:

Desert tech srs covert chassis Tan (no monopod)  with standard and lapua bolts. 2 magnum magazines and one standard (there are 4 in the photos but one is gone) and the torque wrench

28" 1.25 straight contour 7mm saw barrel with heathen brake around 300 rounds fired. 1/3moa or better with 162 and 180gr bullets.

I'll confirm length but I believe 27" black cerakote done by insite with a heathen brake m24 contour I recall. Around 600 rounds fired. Shoots great with the 208s.

Brass and dies for both calibers

265 pcs norma brass for the 300 norma, whidden bushing dies with 2 bushings.

Around 200 pcs 7mm saw brass. Most is alpha and some is formed from 308 lapua palma brass. Hornady dies with 2 bushings.

No scope or bipod included. Located in Edmonton shipping to be discussed. Text is fastest at 613 403 7606 but messages on here are all good too. 

Looking for $6200 For the package. Not separating anything.

Open to trades for other target rifles built on custom actions. interested mostly in the small 6mm (6 arc, 6br, 6bra) or 30br. Im fairly open to most cals (22cm, 25cm, 22 ARC)  nothing belted and no 308. not much of a hunter so no hunting rifles please