WTS RCBS and Lee case trimmers and parts, RCBS case neck turner, bullet pullers, modified cases

RCBS Case Neck Turner with Autoflow. Includes 7 mm and 30 caliber cutters : $100 (shell plates can be purchased  separately from the list below and I will discount on volume)

RCBS Case Trimmer, newer style. Trimmer only: $90 (pilots and shell plates can be purchased  separately from the list below and I will discount on volume): 

RCBS Shell plates: $8 each: #02 x 2, #03 x 2, #04 x 2, #10 x 2, #14 x 1, #31 x 1, $43 x 2 [these shell plates are for the Neck Turner and Case Trimmer; I will not sell them separately until those 2 tools sell]

RCBS pilots, $6 each: 22 x 2; 24 x 2; 25 x 2; 27 x 5; 28 x 4; 30 x 5; 31 x 1; 33 x 3; 35 x 2; 37 x 1; 44 x 3; 45 x 2 [if only 1 is available, I will not sell the pilot until the case trimmer sells, but if there are 2 or more, I will sell all but 1]

RCBS trim head: $15

RCBS Trim Pro, 3 way cutter, 0.22 cal, $60

***********

Lee Trimmer parts

257 Wby: pin only, $3

270 Win: 4 pins and 2 of the round "shell holders" [$3 for pin only and $6 for pin and shell holder

7 Rem Mag: pin only, $3

338 Win Mag, pin and shell holder, $6

************

Bullet pullers

RCBS hammer type, minimal use, with collet, $20 each

Forster puller with 2 collets: 224 and 243, $50

NOTE: additional collets are readily available for the press-mounted puller. For the hammer pullers, I typically use a conventional  shell holder.

******

Modified cases (drilled and tapped) for use with Hornady or Stony Point measuring device

270, 7-08, 7 Rem Mag, 308 (x2); 338 Win Mag: $5 each

TERMS
Payment by EMT or cash at pickup. Pick up in NW Calgary. Shipping is available. Potential delivery to Edmonton or Lethbridge if you are patient and pay in advance.

A clear "I will take it" trumps any discussions or offers. Prices on single items are relatively firm as they are already below retail. However, I will discount on volume on this ad and other ads here on GunPost.