Game Reaper DNZ sku 30702T integral base and rings for 30mm scope Remington 700 med height

Fits many models of Remington long action right hand 20 MOA increased 20 MOA elevation (shoots 20" higher at 100 yds than standard mounts- new never used - for 30 mm scopes,. 1/2 price to new. 

Manufacturer's information below

Remington 700:

Also fits the Remington model 721 and 722 & Bergara B14. Right hand mount fits right hand firearms and left hand mounts fit left hand firearms.

MOA Mounts are tapered down on front for long range shooting. Height will be about .03" lower on front ring than a standard mount.

Base screws are 6-48 X 1/4" long. Ring screws are 6-40 X 5/8" long. Both use a 7/64" Allen wrench.

Some of the .338 Lapua receivers have been modified at the factory and have larger base screws. The size of them is 8-40 and will use a 9/64 Allen wrench. Check your gun and see because the mount will have to be modified. Choose Model 700 (8-40 screws) if your gun uses the larger 8-40 screws.

Short action - Outside to outside of rings is 4.26" for standard ring mounts. Standard rings are .63" wide and have 2 ring screws per ring. Tactical rings are .80" wide and have 4 ring  screws per ring. 4 Hole to hole spacing dimensions are .86", 3.63", .60". Height of mounts from top of receiver to centerline of scope tube is - low .98", medium 1.11", and high 1.23".

Long action - Outside to outside of rings is 4.62" for standard ring mounts. Standard rings are .63" wide and have 2 ring screws per ring. Tactical rings are .80" wide and have 4 ring  screws per ring. 4 Hole to hole spacing dimensions are .86", 4.48", .60". Height of mounts from top of receiver to centerline of scope tube is - low .98", medium 1.11", and high 1.23".

Remington 783:

Mount fits both left and right hand firearms.

Base screws are 6-48 X 1/4" long. Ring screws are 6-40 X 5/8" long. Both use a 7/64" Allen wrench.

Short action - Outside to outside of rings is 4.20". Standard rings are .63" wide and have 2 ring screws per ring.  4 Hole to hole spacing dimensions are .86", 3.25", .86". Height of mounts from top of receiver to centerline of scope tube is -  low .92", medium 1.05", and high 1.17".

Long action - Outside to outside of rings is 4.50". Standard rings are .63" wide and have 2 ring screws per ring.  4 Hole to hole spacing dimensions are .86", 3.54", .86". Height of mounts from top of receiver to centerline of scope tube is -  low .92", medium 1.05", and high 1.17". (Same as Ruger American Long Action)

Remington Model 7 (mounts fit 3 and 4 hole guns):

Fits the Remington model